Publications

SCI, SCI-E, SSCI and AHCI

Azad S.K., Akış T. (2017), Automated selection of optimal material for pressurized multi-layer composite tubes based on an evolutionary approach, Neural Computing and Applications , (doi:10.1007/s00521-016-2563-6)

Kavvas, L., Trinh, T, Ercan, A., Darama, Y., Carr, J.K (2017), Current Issues in and an Emerging Method for Flood Frequency Analysis under Changing Climate, Hydrological Research Letters, Japan Society of Hydrology and Water Resources, Tokyo, Japonya, DOI: 10.3178/hrl.11.1, 1-5

Gökhan Marım, Yakup Darama and Zafer Bozkuş (2017), Optimization of Irrigation Pipe Networks, Teknik Dergi, TMMOB, İnşaat Mühendisleri Odası (Under review, Submitted on April 18, 2017)

Darama Y. (2017), Erosion and Salinity Problems Caused by Irrigation Development in the Harran Plain, Turkey, Submitted to International Journal of Sediment Research for review (July 2017).

Kazemzadeh Azad, S. (2017), Enhanced hybrid metaheuristic algorithms for optimal sizing of steel truss structures with numerous discrete variables, Structural and Multidisciplinary Optimization, 55, 2159-2180.

Kazemzadeh Azad, S., Akış, T. (2017), Automated selection of optimal material for pressurized multi-layer composite tubes based on an evolutionary approach, Neural Computing and Applications, (accepted for publication).

Kazemzadeh Azad, S. (2017), Seeding the initial population with feasible solutions in metaheuristic optimization of steel trusses, Engineering Optimization, (accepted for publication).

Baran E., Akis T., Sen G., Draisawi A (2016), Experimental and numerical analysis of a bolted connection in steel transmission towers, Journal of Constructional Steel Research , 121, 253-260

Trinh, T. Q., J. Su-hyung, K. Ishida, N. Ohara, R. Chen, M. L. Anderson, Y. Darama, Jiongfeng Chen, M.L. Kavvas (2016), Reconstruction of Historical Water Supply from Shasta Dam Watershed by Coupling a Physically-Based Hydro-Climate Model with a Reservoir Operation Model, ASCE Journal of Hydological Engineering, doi.org/10.1061/(ASCE)HE.1943-5584.0001391

Trinh Q. T., K. Ishida, I. Fischer, J. Su-hyung, J. Nosacka, Y. Darama, K. Brown, M.L. Kavvas (2016), New Methodology to Develop Future Flood Frequency under Changing Climate by Means of Physically-based Numerical Atmospheric-Hydrologic Modeling, ASCE Journal of Hydological Engineering, 10.1061/(ASCE)HE1943-5584.0001331.04016001

Darama, Y., Seyrek, K. (2016), Determination of Watershed Boundaries in Turkey by GIS Based Hydrological River Basin Coding, Journal of Water Resources and Protection, dx.doi.org/10.4236/jwarp.2016.811078, 965-981

Numanoğlu Genç, A. (2016), Modeling of sediment transport processes in Alara, Turkey, Journal of the Faculty of Engineering and Architecture of Gazi University, Ankara, 31/3, 545-553

E. Sonmez, S. Nagarajaiah, C. Sun, B. Basu (2016), A Study on Semi-active Tuned Liquid Column Dampers (STLCDs) for Structural Response Reduction under Random Excitations, Journal of Sound and Vibration, 362, 1-15

Numanoğlu Genç, A. (2015), A Model to Simulate Yacht Movements in Enclosed Bays, Journal of Coastal Resarch, 31/2, 364-370

Hasançebi, O., Kazemzadeh Azad, S. (2015), Improving Computational Efficiency of BI Algorithm in Optimal Structural Design, Advances in Structural Engineering​, 18, 1003-1015.

Kazemzadeh Azad, S., Hasançebi, O. (2015), Discrete sizing optimization of steel trusses under multiple displacement constraints and load cases using guided stochastic search technique, Structural and Multidisciplinary Optimization, 52, 383-404.

Hasançebi, O., Kazemzadeh Azad, S. (2015), Adaptive Dimensional Search: A New Metaheuristic Algorithm for Discrete Truss Sizing Optimization, Computers and Structures, 154, 1-16.

Kazemzadeh Azad, S., Hasançebi, O. (2015), Computationally Efficient Discrete Sizing of Steel Frames via Guided Stochastic Search Heuristic, Computers and Structures, 156, 12-28.

Y. Darama (2014), Comment on "Groundwater Depletion in the Middle East from Grace With Implication for Transboundary Water Management in the Tigris-Euphrates-Western Iran Region" by Katalyn A. Voss, J.S Famiglietti, MingHiu Lo, Caroline de Linage, Matthew Rodel and Sean C. Swenson, Water Resources Research, Vol.50, doi:10.1002/2013WR014084, 754-757

Kazemzadeh Azad, S., Hasançebi, O., Saka, M.P. (2014), Guided stochastic search technique for discrete sizing optimization of steel trusses: A design-driven heuristic approach, Computers and Structures, 134, 62-74.

Kazemzadeh Azad, S., Hasançebi, O. (2014), An Elitist Self-Adaptive Step-Size Search for Structural Design Optimization, Applied Soft Computing, 19, 226-235.

Hasançebi, O., Kazemzadeh Azad, S. (2014), Discrete size optimization of steel trusses using a refined big bang–big crunch algorithm, Engineering Optimization, 46, 61-83.

Numanoğlu Genç, A., İnan, A., Yılmaz, N., and Balas, L. (2013), Modeling of Erosion at Göksu Coasts, Journal of Coastal Research, SI 65, 2155-2160

Balas, L., İnan, A., Numanoğlu Genç, A. (2013), Modelling of Dilution of Thermal Discharges in Enclosed Coastal Waters, Research Journal of Chemistry and Environment, Vol.17(10), pp.82-89

Kazemzadeh Azad, S., Hasançebi, O., Kazemzadeh Azad, S. (2013), Upper bound strategy for metaheuristic based design optimization of steel frames, Advances in Engineering Software, 57, 19-32.

Kazemzadeh Azad, S., Hasançebi, O., Kazemzadeh Azad, S., Erol, O.K. (2013), Upper Bound Strategy in Optimum Design of Truss Structures: A Big Bang-Big Crunch Algorithm Based Application, Advances in Structural Engineering, 16, 1035-1046.

Baran E., Akis T., Yesilmen S. (2012), Pull-out behavior of prestressing strands in steel fiber reinforced concrete, Construction and Building Materials, 28, 362-371

Eraslan A.N., Akis T. (2012), Amendments on “Application of Mises yield criterion to rotating solid disk problem” by N. Aleksandrova [Int. J. Eng. Sci. 51 (2012) 333–337], International Journal of Engineering Science, 56, 127-128

Hasançebi, O., Kazemzadeh Azad, S. (2012), An exponential big bang-big crunch algorithm for discrete design optimization of steel frames, Computers and Structures, 110-111, 167-179.

Mertol H. (2010), Creep and Shrinkage Behavior of High-Strength Concrete and Minimum Reinforcement Ratio for Bridge Columns, PCI Journal

Akış T., Tokdemir T., Yilmaz C. (2009), Modeling of Asymmetric Shear Wall-Frame Building Structures, Journal of Asian Architecture and Building Engineering, 8, 531-538

Akış T. (2009), Elastoplastic Analysis of Functionally Graded Spherical Pressure Vessels, Computational Materials Science , 46, 545-554

Eraslan A.N., Akis T. (2008), Discussion of the article "Approximate solution of limit angular speed for externally loaded rotating solid disk" by S. Bhowmick, D. Misra and N.K. Saha [Int J Mech Sci 2008; 50:163-74], International Journal of Mechanical Sciences, 50, 1432-1433

Mertol H. (2008), Characteristics of Compressive Stress Distribution in High-Strength Concrete, ACI Structural Journal

Akış T., Eraslan A.N. (2007), Exact Solution of Rotating FGM Shaft Problem in Elastoplastic State of Stress, Archive of Applied Mechanics, 77, 745-765

M.A. Kökpinar,Y. Darama, I. Guler (2007), Physical and numerical modeling of shoreline evaluation of the Kızılırmak River mouth, Turkey, Journal of Coastal Research, Vol. 23, No. 2, , pp. 445-456, March

S. Nagarajaiah, E. Sonmez (2007), Structures with Semiactive Variable Stiffness Single/Multiple Tuned Mass Dampers, Journal of Structural Engineering, ASCE, 133(1), 67-77

Eraslan A.N., Akis T. (2006), Plane Strain Analytical Solutions for a Functionally Graded Elastic-Plastic Pressurized Tube, International Journal of Pressure Vessels and Piping, 83, 635-644

Eraslan A.N., Akis T. (2006), The Stress Response of Partially Plastic Rotating FGM Hollow Shafts: Analytical Treatment for Axially Constrained Ends, Mechanics Based Design of Structures and Machines, 34, 241-260

Akış T., Eraslan A.N. (2006), The Stress Response and Onset of Yield of Rotating FGM Hollow Shafts, Acta Mechanica, 187, 169-187

Eraslan A.N., Akis T. (2006), On the Plane Strain and Plain Stress Solutions of Functionally Graded Rotating Solid Shaft and Solid Disk Problems, Acta Mechanica, 181, 43-63

Eraslan A.N., Akis T., (2005), Yielding of Two-Layer Shrink-Fitted Composite Tubes Subject to Radial Pressure, Forschung im Ingenieurwesen , 69, 187-196

Bakır B.S., Akış E. (2005), Analysis of a Highway Embankment Failure Associated with the 1999 Düzce, Turkey Earthquake, Soil Dynamics and Earthquake Engineering, 25, pp. 251-260

Akış T., Orcan Y. (2004), Experimental and Analytical Investigation of the Mechanics of Crawl Stroke Swimming, Mechanics Research Communications, 31, 243-261

Y. Darama (2004), Stream depletion by a pumping well including the effects of nonlinear variation of evaporation from a phreatic Aquifer, Hydrological Sciences Journal, , Vol:49, No.3, pp. 443-460

Shahrooz, B.M., Deason, J.T., and Tunc G. (2004), Outrigger Beam–Wall Connections. I: Component Testing and Development of Design Model, Journal of Structural Engineering, ASCE, Volume 130, Issue 2, 253-261

Shahrooz B.M., Tunc G., Deason J.T. (2004), Outrigger Beam–Wall Connections. II: Subassembly Testing and Further Modeling Enhancements, Journal of Structural Engineering, ASCE, Volume 130, Issue 2 , 262-270

Eraslan A.N., Akis T. (2003), On the Elastic-Plastic Deformation of a Rotating Disk Subjected to a Radial Temperature Gradient, Mechanics Based Design of Structures and Machines, 31, 529-561

Shahrooz B.M., Tunc G., Deason J.T. (2003), Seismic Performance of Outrigger Beam-Wall Connections, ACI Special Publication 211–Large-Scale Structural Testing, Farmington Hills, Michigan, 223-245

Tunc, G., Deason, J.T., and Shahrooz, B.M. (2002), Structural Wall-Steel Frame Hybrid Buildings: Connections and System Behavior, Composite Construction in Steel and Concrete IV, ASCE, 971-982

Darama Y. (2001), An analytical solution for stream depletion by cyclic pumping well near streams with Semipervious beds, Groundwater, Vol 39, No. 1,, pp. 79-86

Shahrooz, B.M., Gong B., Tunc, G., and Deason, J.T. (2001), An Overview of Reinforced Concrete Core Wall-Steel Frame Hybrid Structures, Progress in Structural Engineering and Materials, Vol. 3, Issue 2, 149-158

Deason, J.T., Tunc G., and Shahrooz, B.M. (2001), Seismic Design of Connections Between Steel Outrigger Beams and Reinforced Concrete Walls, Steel & Composite Structures: An International Journal, Vol. 1, No. 3, 329-340

Y. Darama (1996), Interaction between surface water and groundwater resources in the presence of a pumping well, Technical Journal of Civil Engineering Union, Vol. 7, No. 2, , pp. 1167-1185

Y. Darama, R..B. Wallace, M.D. Annable (1990), Stream depletion by cyclic pumping of wells, Water Resources Research, Vol. 26, No. 6, , pp. 1263-1270

Other Refereed Journals

Akış T. (2017), On the yielding of two-layer composite spherical pressure vessels, Politeknik Dergisi , 20, (in press)

Eraslan A.N., Akis T., Akis E. (2016), Deformation analysis of two-layer composite tubes under cyclic loading of external pressure, Journal of Basic and Applied Research International, 13, 107-119

G. Tunç, D. Demirtürk (2016), Susuz Beton ve Türkiye Gerçeği, Türkiye Hazır Beton Birliği Dergisi, 134, sayfa 69-82

Kazemzadeh Azad, S., Kazemzadeh Azad, S., Hasançebi, O. (2016), Structural optimization using big bang-big crunch algorithm: A review, International Journal of Optimization in Civil Engineering, 6, 433-445.

Kazemzadeh Azad, S., Kazemzadeh Azad, S., Hasançebi, O. (2016), Structural optimization problems of the ISCSO 2011-2015: A test set, International Journal of Optimization in Civil Engineering, 6, 629-638

Akış T., Eren Ö. (2015), Radyal yönde basınç uygulanan fonksiyonel derecelendirilmiş malzemeden yapılmış uzun tüplerde von Mises kriterine göre akmanın başlaması, Politeknik Dergisi, 18, 63-71

Eraslan A.N., Akis T. (2015), Stress analysis in strain hardening two-layer composite tubes subject to cyclic loading of internal pressure, International Journal of Advances in Applied Mathematics and Mechanics, 3, 65-76

Eraslan A.N., Akis T. (2015), Analytical solutions to elastic functionally graded cylindrical and spherical pressure vessels, Journal of Multidisciplinary Engineering Science and Technology, 2, ISSN: 3159-0040

G. Tunç, D. Demirtürk (2015), Ay'da Yaşam Alanı Yapıları, Yapı Dergisi, 409, sayfa 134-140

Kazemzadeh Azad, S., Hasançebi, O., Kazemzadeh Azad, S. (2014), Computationally efficient optimum design of large scale steel frames, International Journal of Optimization in Civil Engineering, 4, 233-259.

Kazemzadeh Azad, S., Hasançebi, O. (2014), Optimum design of skeletal structures using metaheuristics: a survey of the state-of-the-art, International Journal of Engineering & Applied Sciences, 6,1-11.

Alkan N., Akis T. (2013), Psychological characteristics of free diving athletes: A comparative study, International Journal of Humanities and Social Science, 3, 150-157

Kazemzadeh Azad, S., Hasançebi, O. (2013), Improving Computational Efficiency of Particle Swarm Optimization for Optimal Structural Design, International Journal of Optimization in Civil Engineering, 3, 563-574.

Hasançebi, O., Kazemzadeh Azad, S., Kazemzadeh Azad, S. (2013), Automated sizing of truss structures using a computationally improved SOPT algorithm, International Journal of Optimization in Civil Engineering, 3, 209-221.

Kazemzadeh Azad, S., Kazemzadeh Azad, S, Kulkarni A. J. (2012), Structural Optimization Using a Mutation-Based Genetic Algorithm, International Journal of Optimization in Civil Engineering, 2, 80-100.

Hasançebi, O., Kazemzadeh Azad, S. (2012), An efficient metaheuristic algorithm for engineering Optimization: SOPT, International Journal of Optimization in Civil Engineering, 2, 479-487.

Kazemzadeh Azad, S., Hasançebi O., Erol, O.K. (2011), Evaluating efficiency of big-bang big-crunch algorithm in benchmark engineering optimization problems, International Journal of Optimization in Civil Engineering, 1, 495-505.

Eraslan A.N., Akis T. (2007), Numerical Solutions of a Simplified Reactive Flow Model, Arı The Bulletin of the Technical University of Istanbul, 54, 69-75

Akış T. (2006), Isı Etkisi Altındaki Fonksiyonel Derecelendirilmiş Malzemeden Yapılmış Uzun Tüplerde Plastik Akmanın Başlaması, Gazi Üniversitesi Müh. Mim. Fak. Dergisi, 21, 737-743

Akış T., Eraslan A.N. (2005), Radyal Yönde Basınç Uygulanan Konsentrik Uzun Tüplerde von Mises Akma Kriterine Göre Akmanın Başlaması, Gazi Üniversitesi Müh. Mim. Fak. Dergisi, 20, 365-372

Eraslan A.N., Akis T. (2005), Elastoplastic Response of a Long Functionally Graded Tube Subjected to Internal Pressure, Turkish Journal of Engineering and Environmental Sciences, 29, 361-368

Eraslan A.N., Akis T. (2004), Deformation Analysis of Elastic-Plastic Two Layer Tubes Subject to Pressure: an Analytical Approach, Turkish Journal of Engineering and Environmental Sciences, 28, 261-268

Akış T., Coşkun S.B. (2003), Boşluklu Perde Duvar Sistemlerin Serbest Titreşim Periyotlarının Farklı Yöntemlerle Hesaplanması, Gazi Üniversitesi Fen Bilimleri Dergisi, 16, 709-716

International Conference Proceedings

Kazemzadeh Azad, S. (2017), Elitist population size reduction for computationally efficient optimum design of real-size steel structures using evolutionary algorithms, 11th International Conference on Advanced Computational Engineering and Experimenting (ACE-X 2017), Vienna, Austria.

Kazemzadeh Azad, S. (2016), Evaluating sensitivity of stochastic search techniques to profile list ordering in discrete sizing of steel frames, 11th ASMO UK / ISSMO conference on Engineering Design Optimization / NOED2016, Technical University of Munich, Germany.

G. Tunc, Z. Khayyat (2015), The Structural Analysis and Design of Buildings with Shear Walls and Rigid Basements, 2015 ICOCEE, Cappadocia, Nevşehir

G. Tunç, E. Özsaraç (2015), Public-Private Partnership Model in the Health, Energy, and Educational Sectors: An Overview and Critique of the Issues with Recommendations for Improvement, 2015 ICOCEE, Cappadocia, Nevşehir

G. Tunç, A. Mohammed (2015), Strengthening and Repair Methods in Iraq for Reinforced Concrete Beams, World Conference on Technology, Innovation and Entrepreneurship, İstanbul

G. Tunc (2014), Public Policy and the Turkish Construction Sector, Twenty Third World Business Congress, Ankara

Hasançebi, O., Kazemzadeh Azad, S. (2014), Elitist Self-Adaptive Step-Size Search in Optimum Sizing of Steel Structures, International Conference on Advances in Civil and Structural Engineering (CSE), Malaysia.

Hasançebi, O., Kazemzadeh Azad, S. (2013), A comparison of metaheuristics in structural optimization, International Conference on Advances in Civil, Structural and Mechanical Engineering (CSM), Hong Kong.

Y. Darama (2012), Erosion and Sediment Transport Problems in the Harran Plain, 10th International Congress in Civil Engineering

Hasançebi, O., Kazemzadeh Azad, S. (2012), Improving the Big Bang-Big Crunch Algorithm for Optimum Design of Steel Frames, Proceedings of the Eighth International Conference on Engineering Computational Technology, Civil-Comp Press, Stirlingshire, Paper 52, UK.

Kulkarni, A.J., Kale, I.R., Tai, K., Kazemzadeh Azad, S. (2012), Discrete Optimization of Truss Structures using Probability Collectives, 12th International Conference on Hybrid Intelligent Systems (HIS), Pune, India.

Mertol H. (2010), İlköğretim Öğrencilerine Matematik, Fen Bilimleri Ve Teknoloji Derslerinin Mühendislik Eğitimi Kullanılarak Öğretilmesi, Proceedings of International Engineering Education Conference

Mertol H. (2010), Normal Ve Yüksek Dayanımlı Beton Kullanılan Tasarımların Karşılaştırılması, 5. Ulusal Yapı Malzemesi Kongresi ve Sergisi Bildirileri

Mertol H. (2009), Yeni Başlayan İnşaat Mühendisliği Öğretim Üyeleri İçin Başarılı Olabilme Yolları, 1. İnşaat Mühendisliği Eğitimi Sempozyumu

Koohestani, K., Kazemzadeh Azad, S. (2009), An Adaptive Real-Coded Genetic Algorithm for Size and Shape Optimization of Truss Structures, Proceedings of the First International Conference on Soft Computing Technology in Civil, Structural and Environmental Engineering, Civil-Comp Press, Stirlingshire, Paper 13, UK.

Mertol H. (2008), Flexural Design of Prestressed High-Strength Concrete Girders, 4th International Conference on Bridge Maintenance, Safety and Management (IABMAS'08)

F. Keskin, Y. Darama (2008), 3-D Flood Modeling of the Iluh River in Southeastern Turkey by Using HEC-RAS and HEC-GeoRAS, RiverFlow 2008 International Conference , İzmir

Mertol H. (2007), Yüksek Dayanımlı Beton Kullanılan Elemanların Eğilme Tasarımı, 1. Köprü ve Viyadükler Sempozyumu

Mertol H. (2007), Durability and Fatigue Behavior of Concrete Beams Prestressed with CFRP, 3rd International Conference on Durability & Field Applications of FRP Composites for Construction

Akış E., Etkesen Z., Solak T., Mucukgil R., Durukan E., Ünver M., (2007), Redesign and Monitoring of a Portal Structure in Built-Up Area, Proceedings of the 33. ITA-AITES World Tunnel Congress, Underground Space: The 4th Dimension of Metropolises

Solak T., Akış E., Russo M. (2007), Detailed Seismic Analyses for Bolu Tunnel, Proceedings of the 2. Symposium on Underground Excavations for Transportation,

Y. Darama, M.A. Hatipoğlu, K. Seyrek (2007), Problems related to Soil Erosion and Sediment Transport in the Şalıurfa-Harran Irrigation Scheme, International Congress in River Basin Management, Antalya, Vol. I, , pp 538-553

Mertol H. (2006), Durability of Concrete Beams Prestressed with CFRP, Special Session ? Subcommittee 440I, ?FRP Prestressed Concrete?, ACI Fall Convention

Mertol H. (2006), Shrinkage and Creep Properties of High-Strength Concrete Up To 120 MPa, 7th International Congress on Advances in Civil Engineering (ACE 2006)

Mertol H. (2006), Behavior of High-Strength Concrete Columns, 7th International Congress on Advances in Civil Engineering (ACE 2006)

Mertol H. (2006), High Strength Concrete for Flexural Design of Bridge Girders, 7th International Conference on Short and Medium Span Bridges

Mertol H. (2006), Flexural Design of Bridge Girders Using High Strength Concrete, Proceedings of the 2006 Concrete Bridge Conference

Mertol H. (2006), Material Characteristics of High-Strength Concrete up to 18 ksi, Proceedings of the 2006 Concrete Bridge Conference

S. Nagarajaiah, E. Sonmez (2006), Semiactive Variable Stiffness Single/Multiple Tuned Mass Dampers, Fourth World Conference on Structural Control and Monitoring (4WCSCM), San Diego, California, USA

Mertol H. (2005), Behavior and Design Of HSC Members Subjected To Axial Compression and Flexure, Proceedings of the 7th International Symposium on Utilization of High-Strength/High Performance Concrete

Vardar M., Karaoğlan H., Etkesen Z., Akış E., (2005), Case Study- Deformations and Remedial Measures for Nefise Akçelik and Asarkayası Tunnels on Black Sea Coastal Road Project, Proceedings of the 31. ITA-AITES World Tunnel Congress, Underground Space Use: Analysis of the Past and Lessons for the Future

Y. Darama (2004), Sediment Transport by the Drainage Channels of the Harran Plain in the Southeastern Anatolian Project, Proceedings of the 6th International Congress on Advances in Civil Engineering, Istanbul,, Vol II, , pp.1219-1227

M.A. Hatipoğlu, Y. Darama (2004), Hydro schemes in southeastern Anatolian project (GAP), Proceedings of the 6th International Congress on Advances in Civil Engineering, İstanbul, Vol II, , pp. 1256-1264

S. Nagarajaiah, A. Agrawal, E. Sonmez (2004), Response of SDOF systems with Variable Stiffness and Damping Systems to Pulse Type of Excitations, Third International Conference of Earthquake Engineering, Nanjing, China

Y. Darama (2003), Hydraulics of the Cine Dam Stepped Spillway Model, Proceedings of XXX IAHR Congress, Thessoliniki, Greece , Theme D: Experiences from Models and Prototypes, pp. 479-487

Y.Darama, M.A. Kokpinar, I. Guler (2003), Coastal Erosion of the Bafra Plain Near the Kızılımak Mouth and Protection Structures, Proceedings of XXX IAHR Congress, Thessoliniki, Greece , Theme A: Coastal Protection, , pp. 521-530,

Atasaral M., Akçelik N., Solak T., Etkesen Z., Akış E. (2002), Rehabilitation Planning of Old Road Tunnels in Turkey, Proceedings of the International Conference/Workshop and Exhibition on Tunelling and Underground Space Use

Akçelik N., Solak T., Akış E. (2002), Rehabilitation of Dorukhan Tunnel, Proceedings of the International Conference/Workshop and Exhibition on Tunelling and Underground Space Use

Y. Darama (2000), Prediction of Flood Frequencies by Stochastic-Deterministic Hydrological Model, International Symposium on River Flood Defence, Kassel, Germany, Kassel Reports of Hydraulic Engineering, No. 9/2000, pp. G23-G32

Shahrooz, B.M., Deason, J.T., and Tunc G. (2000), Structural Wall-Steel Frame Hybrid Buildings: Connections and System Behavior, Composite Construction in Steel and Concrete IV, The Banff Centre for Conferences Banff, Alberta, Canada

Shahrooz, B.M., Deason, J.T., and Tunc, G. (2000), Cyclic Behavior of Outrigger Beam-Wall Connections,, Sixth ASCCS International Conference on Steel-Concrete Composite Structures, Los Angeles, California, USA

Tunc, G., Deason J.T., and Shahrooz, B.M. (1998), Hybrid Structural Wall-Steel Frame Systems, American Concrete Institute Fall Convention, Los Angeles, California, USA

E. Demiröz, Y. Darama, L. Kuzum (1994), Determination of the effectiveness of the aerators placed on the spillway discharge channels of the Keban Dam, International Conference on Large Dams (ICOLD), Durban, South Africa, Q.71-R.24, pp. 353-367

E. Demiröz, Y. Darama (1992), A comparative study between the prototype and laboratory data of the aerators placed on the spillway discharge channels of the Keban Dam, Proceedings of the International Symposium on Hydraulic Research in Nature and Laboratory, Wuhan, China, Vol. 1, , p 144-150

National Conference Proceedings

F. P. Numanoğlu, G. Tunc (2016), Türkiye'nin Kredi Notu ve Deprem Gerçeği, 3. Genç Mühendisler Sempozyumu, İstanbul Teknik Üniversitesi, İstanbul

M. B. Bozkuş, G. Tunç (2016), İnşaat Mühendisliği ve Etik, 3. Genç Mühendisler Sempozyumu, İstanbul Teknik Üniversitesi, İstanbul

G. Tunç, T. Tanfener (2016), 2007 ve 2016 Türkiye Bina Deprem Yönetmeliklerinin Örneklerle Mukayesesi, 3. Ulusal Yapı Kongresi, Ankara, 153-166

G. Tunc (2015), Depreme Dayanıklı Bina, Bilinçli Tüketici ve Güven Kavramları Üzerine İnceleme ve Öneriler, 3. Türkiye Deprem Mühendisliği ve Sismoloji Konferansı, Dokuz Eylül Üniversitesi, İzmir

G. Tunç, E. Özsaraç (2015), Türkiye'de Kamu Özel İşbirliği Modelinin İyileştirilmesine ait Öneriler, 3. Türkiye Deprem Mühendisliği ve Sismoloji Konferansı, Dokuz Eylül Üniversitesi, İzmir

Tunc, G., Özuygur, A.R., and Yurtsever, M. (2011), Critiques of the Turkish Seismic Code, 7th National Earthquake Engineering, Istanbul, Turkey

Tunc, G., Özuygur, A.R., and Yurtsever, M. (2011), The Turkish Seismic Code and Case Studies, 7th National Earthquake Engineering, Istanbul, Turkey

Tunc, G., Uğraş, B., and Tanfener, A. (2009), Steel Case Study: Planetarium Building and the Gaziantep Zeugma Mosaic Museum, 3rd National Steel Symposium, Gaziantep, Turkey

Darama, Y., İ. Kaş, M. A. Kökpınar (2005), Rehabilitation of the Kozlu Creek Black Sea outlet, 5. Ulusal Kıyı Mühendisliği Sempozyumu, Bodrum, Vol. 2, pp. 223-254

Y. Darama (2003), Dolusavak boşaltım kanallarında ve enerji kırıcı yapılarındaki akım karakteristiklerinin belirlenmesi, V. Hidrolik Mühendisliği Problemleri Semineri, Fethiye, Vol. 1, , pp.18-1 – 18-22

Darama Y., S. Kapdaşlı, D. Z. Şeker (2002), Rehabilitation of River Mouths an Example study: Riva Creek, 4. Ulusal Kıyı Mühendisliği Sempozyumu, Antalya, Vol:2, pp 713-730

Guler I., Y. Darama, M. A. Kokpinar (2002), Kızılırmak Agzı Kıyı Çizgisi Değişimi, IV. Ulusal Kıyı Mühendisliği Sempozyumu, Antalya, Vol. 1, , pp. 703-711

Kökpınar M.A., I. Güler, Y. Darama (2000), Bafra Ovası Kızılırmak-Karadeniz Birleşimindeki Kıyı Erezyonunun İncelenmesi, III Ulusal Kıyı Mühendisliği Sempozyumu, Çanakkale, Vol 1., sayfa 507-542

Acar Ö., H. Önder, Y. Darama (1998), Misli Havzasında Yeraltı Su Akımının Sayısal Bir Model ile Simulasyonu: Modflow Program Paketinin Uygulanması, V. Hidrolik Mühendisliği Problemleri Semineri, Fethiye, Vol. 1, , pp.5-1 – 5-21

Üzücek, E., Y. Darama, D. Yıldız (1993), Sıçratma uçlu dolusavakların mansabında oluşan oyulma bölgesi ve derinliğinim belirlenmesi, İnşaat Mühendisliğinde kullanılan bilgisayar modelleri 4. Sempozyumu-İTÜ, İstanbul, Vol. 1, , pp. 161-170

Books

Editor: J.L. Clarke, Translation By: Tunc, G., Özuygur, A.R., Yurtsever, M (2010), Structural Light Weight Aggregate Concrete (Translation), YPT Press, Ankara, Turkey

Mertol H. (2002), Deprem Mühendisliğine Giriş, Kozan Ofset

Tunc, G., Deason, J.T., and Shahrooz, B.M. (2001), Seismic Behavior and Design of RC/Composite Wall-Steel Frame Hybrid Buildings, Cincinnati Infrastructure Institute, Cincinnati, OH, USA

Articles

Akış, E. Solak, T. (2016), İnşaat Mühendisliğinde Yeraltı Yapıları ve Tünelcilik Eğitimi, 3. İnşaat Mühendisliği Eğitimi Sempozyumu, 8-9 Ocak 2016

Akış E. (2014), Dünyada ve Türkiye'de Tünellerin Tarihçesi, Yollar Türk Milli Komitesi Bülteni, 7, 3-4

İnan, A., Yılmaz, N., Numanoğlu Genç, A. and Balas., L., (2012), Coastal Hydrodynamics along the Eroded Beach of Akyaka in Gökova Bay, Turkey, Recent Advances in Engineering, ISSN:2227-4588, 133-140